Last Update: 02/21/18
Guitar for K.G.
Model: H2a
Specifications:
Upgraded H1a covered vee neck head joint. | |
Upgraded H1a covered vee neck head joint back view. | |
Side view of head and neck joint. | |
Thicknessing the back. | |
Sides ready for bending. | |
Sides bent. | |
Bracing the back. | |
Shaping the braces. Back complete. | |
Bracing the soundboard. | |
Shaping the braces. | |
Preparing the neck to be attached to soundboard. | |
Neck ready to glue to soundboard. | |
Gluing the neck to the soundboard. | |
Fitting the sides. | |
Sides attached to soundboard. Gluing the back lining to the sides. | |
Tail purfling. | |
Fitting the back. | |
Ready to attach back to the body. | |
Signed backwards so when looked at with an inspection mirror.... | |
it looks like this! | |
Back glued on. | |
Construction complete. Applying the French polish finish. | |
French polish complete. Curing stage. | |
Ready to string up! | |
Installing tuners. | |
Ready to install nut, saddle and strings. | |
Two saddles. Top: Medium/low action Standard 2.8mm 1st string and 3.1mm 6th string. Bottom: 3mm 1st string/ 4mm 6th string high action. |
|
Close up of completed guitar rosette and label. | |
Front view. | |
Completed guitar soundboard view. | |