Last Update: 4/03/05

Guitar for Bob Wysong


Date Started: June 23, 2004
Date Completed: March 20, 2005

Model: Professional

Specifications:

Back and Sides prior to thinning and joining.

Laminated sides.

Soundboard.

Hand-made Pacific-Northwest style rosette by David Schramm.

Fan braces being glued on in the go-bar deck.

Close-up.

Soundboard bracing.

Soundboard.

Three piece neck cut from the same board. The board is split down the middle and the two pieces are flipped and rotated. This is a technique I learned from John Gilbert for building very stable necks.

Brazilian rosewood Headplate and maple veneer glued onto the head.

Back view of the head.

Basic parts, neck, top, sides.

Head after detailing.

Neck ready to be attached to the soundboard.

Neck and soundboard being glued together.

Sides being glued to the top.

Back ready to be thinned.

Back glued to the body.

Top binding and purfling.

Fingerboard ready for gluing.

Ready for finish prep.

Lacquer application on back, sides and neck.

Back view.

Final coats of lacquer. Notice the Bee's Wing figure!

Final coats of lacquer on the back.

Complete guitar curing in prep for final sanding and buffing.

Bridge being glued on. Ready for final buffing and set up.

The finished guitar.

AUDIO SAMPLE: Serenata Espanol by J.Malats 1.19MB MP3, 39 secs.

Beautiful Cocobolo!!!

Great sound. Deep and rich basses with warm and clear trebles. Great concert guitar.



Your are visitor
25
since August 11, 2004

Home